Welding in North County San Diego
Finding a nearby shop that welds to your drawing, commits to a ship date and handles the code paperwork can take more calls than it should. Jones Welding & Manufacturing is in Vista, close to Oceanside, Carlsbad, San Marcos and Escondido.
What we do.
Two ways to use the same shop: we make your welded parts, or we help you make them yourself.
Parts welded in our shop
- Aluminum TIG weldingBrackets, frames and tube assemblies. AWS D1.2.
- Stainless steel welding316 TIG welding, heat tint and passivation. AWS D1.6.
- Carbon steel weldingMIG and TIG assemblies. AWS D1.1. Production runs.
- Inconel, titanium and duplexTIG welding hard alloys to a qualified procedure.
- Pipe spool weldingASME B31.3 spools, ASME Section IX procedures, MTRs.
- Prototype to productionFirst part checked to print, then the run.
- Weld fixtures and jigsWelded steel, 3D-printed or hybrid, built before welding.
- Weld procedures and testingWPS/PQR, welder qualification, VT, bend and PT testing.
Welding in your shop
Who we work with.
Engineers, buyers and contractors who need welded parts built to a drawing.
01
EV and automotive
Brackets, frames and tube assemblies, prototype to production.
02
Aerospace and composites
Welded metal parts with material certs and weld inspection reports.
03
Industrial equipment and OEMs
Repeat weldments built in fixtures, so every part matches.
04
Water and infrastructure
Shop-welded components such as flanged spools, with MTRs and weld records.
Shop work for manufacturers and contractors, including:
Visit the shop.
1485 Poinsettia Ave, Suite 106
Vista, CA 92081
Shop visits and supplier audits are by appointment. Call (760) 532-8731 or email estimating@jonesweld.com to set a time. Certificate of insurance on request.
Where we work
Our shop is in Vista, in North San Diego County, near Oceanside, Carlsbad, San Marcos and Escondido. We also serve San Diego, Orange, Riverside, Los Angeles and San Bernardino counties.
Who you’ll deal with
Jones Welding & Manufacturing was founded by Brad Jones, with 20 years in welding. One point of contact handles your job from quote to delivery.
Capabilities
Capabilities at a glance.
Materials, codes, testing and what ships with your parts.
| Materials | Aluminum · stainless, including 316 · carbon steel · Inconel · titanium · duplex stainless |
|---|---|
| Processes | TIG (GTAW) · MIG (GMAW) |
| Codes | AWS D1.1 · D1.2 · D1.3 · D1.4 · D1.6 · D1.8 · ASME Section IX · ASME B31.3Other codes on request. We qualify to what your job calls for. |
| Procedures | WPS/PQR developed and qualified · welder qualification records |
| Fixtures | Welded steel, 3D-printed or hybrid, built before welding so every part sets up the same |
| Inspection | First part checked against your drawing before the run · visual weld inspection |
| Testing | In-house: visual (VT), bend tests, dye penetrant (PT)X-ray (RT) and ultrasonic (UT) through an independent lab when the job calls for it. |
| Paperwork | Material certs (MTRs) · weld inspection reports · test results |
| Finishing | Powder coat · anodize · passivation · post-weld machiningIn-house or through our finishing partners. |
| Runs | Single prototypes through productionIncluding a 130-piece carbon steel post run. |
| Supplier | Certificate of insurance on request · shop visits and supplier audits by appointment |
| Quoting | Send the drawing (PDF, STEP or DXF), quantity and need-by date. Get a written price and a ship date.NDA on request. Expedited runs when you need them. One point of contact from quote to delivery. |
How a job runs.
From your drawing to packed, documented parts.
- 01
Send the drawing
PDF, STEP or DXF, plus the quantity and the date you need the parts. NDA on request.
- 02
Get a price and a ship date
In writing. If material pricing holds up the quote, we tell you right away. Expedited runs when you need them.
- 03
First part checked to print
Part one is welded in its fixture and checked against your drawing before the run starts.
- 04
The run
Every part sets up in the same fixture, so the last part matches the first.
- 05
Inspected, packed, documented
Visual weld inspection, then packed and shipped with material certs, weld inspection reports and test results when your job needs them.
Recent work from the shop.
Aluminum, stainless and carbon steel. Every part shown was welded by Jones.
North County questions.
Where is your shop?
1485 Poinsettia Ave, Suite 106, Vista, CA 92081, in North San Diego County.
Can we visit or audit the shop?
Yes, by appointment, for shop visits and supplier audits alike. Call (760) 532-8731 or email estimating@jonesweld.com to set a time.
Which areas do you serve?
North San Diego County, including Vista, Oceanside, Carlsbad, San Marcos and Escondido, plus San Diego, Orange, Riverside, Los Angeles and San Bernardino counties.
What kind of work is a good fit?
Welded parts built to a drawing, from a single prototype to a production run: aluminum, stainless and carbon steel, plus Inconel, titanium and duplex stainless. Code work to AWS D1.x, ASME Section IX and ASME B31.3.
Can you send a certificate of insurance?
Yes, on request.
Who is behind Jones?
Jones Welding & Manufacturing was founded by Brad Jones, who has 20 years in welding. One point of contact handles your job from quote to delivery.
Start here
Start here
Send us a drawing.
Send the drawing, the quantity and the date you need the parts. Or call to set up a shop visit.
Call(760) 532-8731
Shop
1485 Poinsettia Ave, Suite 106
Vista, CA 92081
Shop visits and supplier audits by appointment